New Edge Tech: Better Axle Behavior With Maximum Motorsports’ Sport Lower Control Arms
Strong Arm Tactics: Better axle behavior with Maximum Motorsports’ Sport lower control arms
Enthusiasts sometimes have different priorities than the engineers who design the cars we enjoy. Cost, noise, and performance are all factors, but enthusiasts and engineers may put these factors in a different order.
Looking at the OEM 1979-2004 Mustang lower control arm’s stamped-steel construction and huge rubber bushings, it is clear that the engineers designed them to be inexpensive and to keep road noise and vibration away from the chassis. With that in mind, the OEM lower control arms do their jobs well. But performance was an afterthought.
For enthusiasts, performance is a priority. That’s where aftermarket offerings from companies like Maximum Motorsports come in. They offer a wide range of rear lower control arm options for 1979-2004 Mustangs. For our street-cruiser 2004 Mustang GT convertible, Maximum Motorsports recommended its Sport Series lower control arms.
The Maximum Motorsports Sport Series lower control arms for 1999-2004 Mustangs feature straightforward, heavy-duty construction and three-piece polyurethane bushings. They accept the OEM sway bar and spring isolators, which makes them a perfect fit for our daily driver convertible.
As is the case with many Maximum Motorsports products, the control arms fit like a glove. The control arms gave our car more “bite” under acceleration, and the axle felt more settled under braking. Even though the polyurethane bushings flex significantly less than the soft OEM equipment, during normal driving we didn’t notice any increase in noise, vibration, or harshness. The Maximum Motorsports Sport Series Lower Control Arms were a perfect enhancement for our convertible cruiser.
1. Maximum Motorsports Sport Series lower control arms for 1999-2004 solid-axle Mustangs feature heavy-duty construction, three-piece polyurethane bushings, and a durable powdercoated finish. They are a direct OEM replacement.
2. The three-piece bushings on both ends feature a thinner, harder polyurethane bushing in the center sandwiched by two softer outer bushings. This allows the harder inner bushing to transfer acceleration and braking forces to the chassis more directly but still allows the control arms to articulate when going around corners, saving the delicate sheetmetal torque boxes in the chassis from damage.
9. With the control arms removed, we could compare them to the Maximum Motorsports Sport Series lower control arms. Note that the OEM arm’s flexible stamped steel construction and large, squishy rubber bushings.
13. Now we were ready assemble the bushings into the Maximum Motorsports Sport Series lower control arms. We used the supplied waterproof grease to coat all of the bushing surfaces. (Tip: if you don’t have any disposable gloves, mineral spirits easily remove the grease from your fingers.)
21. Under hard acceleration we could feel the Maximum Motorsports Sport Series lower control arms giving our Mustang a harder “bite” on the pavement. In First gear our stock 4.6L 2V engine struggled to break traction, but when it did the tires regained their grip in a smooth, progressive manner.